DEKALIN Dekaseal MS-8 600ML Case Auto Glass Primerless Adhesive, 1 Hour Drive Time

Introducing Dekaseal MS-8 Comes as a case of 12, 600ml foil / sausage wraps. The "Green" AdhesiveDEKASYL MS-8 is a MS-polymer based high modulus windscreen adhesive with a very high initial tack and fast strength build up.DEKASYL MS-8 has an excellent primerless adhesion on glass an windscreens with a ceramic frit and can be used to bond windscreens in motor homes, cars, trucks, busses, etc. DEKASYL MS-8 can be used in the direct glazing aftermarket and has excellent adhesion to freshly cut (original used) PU- and MS based windscreen adhesives. Due to its very high initial tack, clamping times can often be reduced or clamps are not needed anymore.Why Choose MS-8: The "Green" Adhesive• Free from isocyanates, solvents, silicone and PVC• Very high initial tack• Fast strength build up and high modulus• Very good adhesion on glass and glass with a ceramic frit without the use of a primer• Excellent adhesion to freshly cut (original used) PU- and MS based windscreen adhesives• Very good UV-resistance and ageing properties• Very low conductivity• Safe drive away time of 1 hour (according to FMVSS212 with double airbag)• Permanent elastic within temperatures from -40°C till +100°C• Short term resistance up to +200°C (10 minutes) in cured conditionDEKASYL MS-8 Windscreen AdhesiveTechnical DetailsApplication:• Bonding of (new and aftermarket) windows in motor homes, cars, trucks, busses, trains, etc.• Elastic bondings in motor home, bus-, train-, and truck construction.• General bonding applications where a high initial tack is required.How to use:DEKASYL MS-8 can be applied with a hand-held, battery-operated or air-operated gun at temperatures from +5°C to 35°C. It is recommended to use the V-nozzle for bonding applications. Depending on the bonding surface, material expansion and mechanical stresses, a layer of 2-6 mm is recommended. The greater the difference in thermal expansion, the thicker the adhesive layer should be. For further information on this, please contact DEKALIN. For bonding, the substrates must be assembled within 15 minutes (at 20°C/50% rel. humidity) after application of DEKASYL MS-8. The higher the temperature, the shorter the working time! At a temperature of 20°C and a relative humidity of 50 %, DEKASYL MS-8 can be painted with most industrial paints after only 15 minutes. The best possible adhesion of paint coats is generally achieved when the paint is applied within 4 hours after application of DEKASYL MS-8. Clean tools or remove uncuredresidues of DEKASYL MS-8 with a clean, colorless cloth soaked in DEKACLEAN ULTRA (it is recommended to check beforehand whether the surface is effected by this cleaner).Adhesion:In general, DEKASYL MS-8 adheres well without primer to clean, dry, dust and grease-free substrates made of glass, ceramic screen-printed glass, aluminum, stainless steel, galvanized steel, zinc, copper, brass, powder-coated metal, most painted metal surfaces, various plastics, PVC, polyester (GRP), paintedand varnished wood, etc. No adhesion without pre-treatment on polyethylene, polypropylene and Teflon®. It is recommended to clean the substrates with DEKACLEAN ULTRA. An adhesion test before application is recommended. If high adhesion is required in cases of high thermal or physical stress, especially in humid environments, the use of DEKAVATOR 22 NF is recommended.Important note: although DEKASYL MS-8 is UV stable, in applications with transparent substrates the adhesive should always beprotected against UV radiation by means of a suitable black primer or a masking profile. For properties on substrates notmentioned above and further information please contact your Dekalin customer service directly.Waiver of Liability: This product is a professional use item. Please refer to the AGR manual on how to properly remove and replace any piece of glass on a vehicle. All information, recommendations and safety precautions are based on in-house studies and experience and are not binding. Although the documentation has been created with great care, we do not assume any liability for errors, inaccuracies or printing errors. We reserve the right to update the product whenever we feel it is necessary. As the implementation, the condition of the substrate and the conditions under which the product is used lie outside our sphere of influence, we cannot assume any responsibility for work that has been carried out based on this documentation. We therefore recommend testing the product on site. By purchasing this product, the buyer, agrees to hold harmless the sellers and Dinol of any liability.

• DEKASYL / DEKASEAL MS-8 600ML Foil / Sausage Pack (Case of 12)
• Eco-Friendly Adhesive: Primerless, free from isocyanates, solvents, silicone, and PVC; low conductivity, ideal replacement for urethane
• Rapid Drive-Away: 1-hour safe drive-away time (FMVSS 212, dual airbags), getting vehicles back on the road faster
• Superior Adhesion: Bonds strongly to glass, ceramic frit, and most surfaces without primer; fully paintable
• Versatile Applications: Ideal for cars, trucks, buses, motorhomes, and more; OEM-approved quality